+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: Kubota SVL 75-2 Tree Spade Help (/thread-6751.html)
Kubota SVL 75-2 Tree Spade Help - MikePhua - 07-05-2025
A user on panswork raised an issue with the Kubota SVL 75-2 tree spade, specifically with the hydraulic system. The problem appears to be related to the system's failure to function as expected when operating the tree spade. The individual is seeking help in troubleshooting and resolving the malfunction.
Hydraulic Troubleshooting
The initial problem involves the tree spade’s hydraulic operation. It appears that the hydraulic pressure is not being properly delivered to the tree spade, which is preventing it from functioning correctly. The user is seeking insights into potential causes, including issues with the hydraulic pump or valves. One important note is that the user has not experienced any obvious physical damage to the system, so the issue is likely internal.
Possible Solutions and Steps Forward
- Check the Hydraulic Oil Level and Quality
- Ensure the hydraulic oil is at the proper level and that it is clean. Dirty oil or low oil levels could reduce the efficiency of the system.
- Ensure the hydraulic oil is at the proper level and that it is clean. Dirty oil or low oil levels could reduce the efficiency of the system.
- Inspect Hydraulic Hoses and Fittings
- Check for any visible leaks, cracks, or blockages in the hydraulic hoses. A small leak could cause a loss of pressure, affecting performance.
- Check for any visible leaks, cracks, or blockages in the hydraulic hoses. A small leak could cause a loss of pressure, affecting performance.
- Test the Hydraulic Pump
- If the pump is not functioning properly, it may need to be tested or replaced. Low pressure could indicate a failing pump.
- If the pump is not functioning properly, it may need to be tested or replaced. Low pressure could indicate a failing pump.
- Examine the Valves
- Sometimes, issues in the control valve or directional valve can cause inconsistent hydraulic flow. Ensure these are functioning properly and are not clogged or damaged.
- Sometimes, issues in the control valve or directional valve can cause inconsistent hydraulic flow. Ensure these are functioning properly and are not clogged or damaged.
Troubleshooting the hydraulic system on the Kubota SVL 75-2 tree spade requires a methodical approach, checking oil, hoses, the pump, and the valves. With a systematic check, the user should be able to identify and fix the problem. If the problem persists, seeking expert assistance or a professional repair might be necessary.
This issue is a common challenge for anyone operating tree spades or similar heavy machinery, so this advice could help others with similar problems.