+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: Case 75XT Skid Steer Lift Power Issue and Difficulty Lowering Boom Troubleshooting (/thread-6673.html)
Case 75XT Skid Steer Lift Power Issue and Difficulty Lowering Boom Troubleshooting - MikePhua - 07-05-2025
Some users of the Case 75XT skid steer have reported a lack of lift power and difficulty when lowering the boom, which requires excessive effort. This issue can impact the machine's normal operation, particularly in tasks that require frequent lifting or lowering of the boom. Users are seeking to understand the potential causes of this problem and how to resolve it. This article will analyze the possible causes and offer solutions for troubleshooting and fixing the issue.
Issue Analysis
- Hydraulic System Pressure Issues
Insufficient hydraulic pressure is a common cause of reduced lift power and difficulty lowering the boom. A malfunctioning hydraulic pump, pressure sensor, or hydraulic fluid can lead to the hydraulic system being unable to generate enough power. If the hydraulic system pressure does not remain within the normal range, the machine may exhibit these symptoms.
- Contaminated Hydraulic Fluid or Low Fluid Levels
Contaminated hydraulic fluid or low oil levels can directly affect the hydraulic system’s efficiency. Contaminated hydraulic fluid can damage the hydraulic pump and valves, reducing the system’s performance. Additionally, low fluid levels can cause air to enter the pump, further impairing the hydraulic system’s function, leading to reduced lift power and difficulty lowering the boom.
- Hydraulic Pump Failure
The hydraulic pump, being a core component of the hydraulic system, can also be a source of this issue. If the pump is worn out or has internal leakage, it can fail to maintain the required hydraulic pressure, thus affecting the machine's lifting ability.
- Valve or Control System Malfunctions
Faults in the hydraulic valves and control systems can also cause the hydraulic system to malfunction, particularly when controlling the lift and boom lowering functions. If the valves are sticky or leaking, or if sensors in the control system are damaged, the hydraulic flow may not be properly distributed, resulting in abnormal lifting and lowering operations.
- Electrical System Issues
Electrical system faults can also contribute to hydraulic system malfunctions. Poor electrical connections, control module failures, or insufficient battery voltage can affect the control of the hydraulic system, leading to issues with lift power and boom lowering.
- Check Hydraulic System Pressure
Use a pressure gauge to check the hydraulic system’s working pressure to ensure it is within the normal range. If the pressure is insufficient, inspect the hydraulic pump and pressure sensors for proper operation. Clean the hydraulic system and check for leaks in all hydraulic lines if necessary.
- Inspect Hydraulic Fluid and Oil Levels
Check the cleanliness of the hydraulic fluid and verify the oil levels. If the hydraulic fluid is contaminated or the oil level is too low, replace the fluid and top up the oil to the correct level. Use high-quality hydraulic fluid to avoid contamination issues and extend the life of the hydraulic system.
- Inspect the Hydraulic Pump
Check for wear or leakage in the hydraulic pump. Worn-out pumps will fail to generate sufficient pressure, which affects the performance of the hydraulic system. If the pump is faulty, it needs to be replaced or repaired.
- Inspect Hydraulic Valves and Control System
Check the hydraulic valves and control system for normal operation. Ensure all valves are operating smoothly without sticking. If there are leaks in the valves or damaged sensors in the control system, replace the faulty components. Use diagnostic tools to check for faults in the control system.
- Check the Electrical System
Inspect the electrical system for faults. Verify that the battery voltage is sufficient and check that the control module and electrical connections are secure. If there are issues with the electrical system, repair them promptly.
The issues of reduced lift power and difficulty lowering the boom in the Case 75XT skid steer are often caused by hydraulic system pressure problems, contaminated hydraulic fluid, hydraulic pump failure, valve or control system malfunctions, or electrical system issues. By checking and repairing the hydraulic system, hydraulic fluid, hydraulic pump, valves, and electrical system, this problem can be effectively resolved. Regular maintenance of the hydraulic and electrical systems will help improve the machine's efficiency and lifespan, ensuring it operates smoothly in various working environments.