Excavator Forum
John Deere 326E and 333G Quick Attach Pins Sticking Issue and Solutions - Printable Version

+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: John Deere 326E and 333G Quick Attach Pins Sticking Issue and Solutions (/thread-6643.html)



John Deere 326E and 333G Quick Attach Pins Sticking Issue and Solutions - MikePhua - 07-04-2025

Operators using the John Deere 326E and 333G skid steers have reported that the quick attach pins tend to stick, causing operational difficulties. Many have mentioned that the pins get stuck during installation and removal, especially when the equipment has not been properly maintained for an extended period. This issue not only affects operational efficiency but could also prevent the quick attach from securely connecting, compromising the safety of the work.
Cause Analysis
  1. Lack of Lubrication
    Due to environmental factors or long periods without proper lubrication, friction between the pins and the attachment increases, causing them to get stuck.
  2. Dirt and Corrosion Build-Up
    Over time, dirt, mud, or moisture can enter the attachment area, leading to pin corrosion and sticking. This problem is especially common in wet or dusty working environments.
  3. Part Wear and Tear
    Prolonged use of the pins and attachment without timely replacement or maintenance can result in excessive wear, which can also lead to jamming.
Solutions
  1. Regular Lubrication
    Regular lubrication of the quick attach pins and attachment parts can effectively reduce friction and prevent sticking. Use suitable lubricants or grease to ensure even coverage.
  2. Cleaning and Maintenance
    After each use, clean the attachment area of dirt and debris to prevent the accumulation of foreign materials. Use compressed air or brushes to clean the pins and attachment to avoid corrosion.
  3. Inspect and Replace Worn Parts
    Regularly inspect the pins and attachment for signs of wear. Replace any severely worn parts to ensure smooth operation.
  4. Use of Corrosion Inhibitors
    Applying corrosion inhibitors to the pins and attachment, especially when working in wet or harsh conditions, can effectively prevent corrosion.
Conclusion
By performing regular lubrication, cleaning, and inspection, operators can significantly reduce the issue of quick attach pins sticking on the John Deere 326E and 333G skid steers. Timely maintenance and protective measures will not only extend the equipment's lifespan but also improve operational efficiency.