+- Excavator Forum (https://www.panswork.com)
+-- Forum: Service & Trade (https://www.panswork.com/forum-11.html)
+--- Forum: Excavator Repair Shop & Troubleshooting (https://www.panswork.com/forum-42.html)
+--- Thread: Analysis of Ford 755A Backhoe Not Starting (/thread-6099.html)
Analysis of Ford 755A Backhoe Not Starting - MikePhua - 07-03-2025
The Ford 755A is a classic backhoe/loader known for its durability and reliability in various construction and digging tasks. However, some users have encountered issues with the machine not starting, which not only disrupts work but can also lead to costly repairs. This article will analyze the common causes behind the Ford 755A’s starting problems and provide solutions to address them.
Problem Description
Many Ford 755A users report that the machine fails to start, even when the battery is fully charged and the voltage is normal. In some cases, when attempting to start, there is no response from the engine, or the starter motor fails to turn. Some users hear a clicking sound, but the engine does not turn over. These issues may stem from various components, including the electrical system, fuel system, and starting system.
Cause Analysis
- Battery Issues: Even if the battery appears to be fully charged, its performance may be affected by age, cold temperatures, or internal damage. The battery may show a normal voltage but fail to provide the necessary current to start the engine.
- Starter Motor Failure: The starter motor is essential for turning the engine over during startup. If the starter motor is faulty—due to worn brushes, damaged coils, or poor internal connections—it may fail to rotate the engine during startup.
- Fuel System Issues: Problems with the fuel system, such as a clogged fuel filter, a faulty fuel pump, or insufficient fuel delivery, can prevent the engine from receiving enough fuel to start. In colder temperatures, diesel fuel can become less fluid, further exacerbating fuel system issues.
- Ignition Switch or Electrical Connection Issues: If the ignition switch fails or if there are loose or corroded electrical connections, the signal may not reach the starter motor properly, preventing the engine from starting.
- Relay or Fuse Issues: A malfunctioning relay or blown fuse can interrupt the power flow to the starting system, preventing the motor from receiving enough electricity to start the engine.
- Check the Battery: Even if the battery voltage appears fine, check the overall health of the battery. If the battery is old or its performance has diminished, it may need to be replaced. Also, inspect the battery terminals for corrosion or loose connections and clean or tighten them as necessary.
- Inspect the Starter Motor: Check the connections and condition of the starter motor. If it’s found to be faulty or damaged, it may need to be repaired or replaced. Inspect the starter motor brushes for wear and ensure the coils are functioning correctly.
- Inspect the Fuel System: Clean or replace the fuel filter to ensure fuel is flowing freely. Inspect the fuel pump and injectors to confirm that fuel is reaching the engine properly. If operating in cold temperatures, consider using winter-grade diesel or adding fuel additives to improve fuel flow.
- Check Electrical Connections: Inspect the ignition switch, terminals, and other electrical components to ensure all connections are secure and free of corrosion. If any connection is loose or oxidized, clean it and reconnect it properly.
- Check Relays and Fuses: Inspect the relays and fuses in the starting system. If any fuses are blown or relays are faulty, replace them to restore proper power supply to the starting system.
The Ford 755A’s failure to start is typically caused by battery issues, starter motor problems, fuel system malfunctions, poor electrical connections, or faulty relays and fuses. By checking the battery, starter motor, fuel system, electrical connections, and relays/fuses, you can effectively diagnose the issue and resolve the problem. Regular maintenance and timely inspections of these key components will ensure that the Ford 755A backhoe starts smoothly and operates efficiently, improving both productivity and safety.